Skip to main content
Provide the Appliance Model, Symptoms, Service Address, and Access Details. Appointment Requirements Are Confirmed Before Scheduling. Refrigeration Service Planned for the Diagnosed Scope Genuine OEM Parts 365-Day Repair Warranty

Error Codes

Dacor Error Code Guide

Dacor has used several control generations, so how a fault is reported depends on the age of your unit. Here is what to expect and how the underlying problems are found.

Short answer: Newer electronic Dacor models can display coded faults, while older units communicate through symptoms. Either way the fault points to a sensor, element, relay, or control. A one-time reset clears a glitch; a recurring fault needs a technician. Match any code to your model number.

Two Generations, Two Behaviors

Dacor's cooking products span mechanical and older electronic controls through to the current touchscreen models. That means there is no single universal Dacor code chart. Newer units may show a fault on the panel, while older ovens tell you something is wrong by how they behave, not heating, running hot, or a display that will not respond. We flag this so you are not searching for a numeric code that your particular model never produces.

What Faults Point To

Whatever form the alert takes, the common causes are the same handful of components. A temperature-sensor fault stops the oven from trusting its reading, so it will not heat correctly. A heating fault, an element or a gas igniter, means no or slow heat. A control or relay fault can lock up the panel or prevent a function. A door-lock fault can appear after self-clean. Identifying which one is the job of a diagnosis.

What You Can Do First

A brief power reset, switching the oven off at the breaker for a few minutes, will clear a one-time electronic glitch. If the fault or symptom returns, it is real and repeated resets will not help. Note exactly what the display shows or how the oven is misbehaving, and find your model number so the fault can be matched to the correct control generation.

Fault Categories at a Glance

Fault AreaTypical SymptomResponse
Temperature sensorNo heat or wrong temperatureTest and replace sensor
Heating (element/igniter)Slow or no heatReplace element or igniter
Control / relayPanel locks or function failsReset once; diagnose control
Door lockStuck after self-cleanCool fully; service lock
Recurring faultReturns after resetProfessional diagnosis
Photograph the display and find the model number. With Dacor's several control generations, that pairing is what lets us match the fault correctly and bring the right part.

Fault Keeps Returning?

Book a brand-focused diagnosis for your Dacor. Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.

Frequently Asked Questions

Do Dacor Ovens Show Error Codes?
It depends on the generation. Newer electronic Dacor models can display coded faults on the panel, while older models communicate mostly through symptoms. In both cases the underlying fault, a sensor, element, or control, is what needs to be identified.
My Dacor Oven Shows a Fault and Will Not Heat. What Should I Do?
Try a short power reset to clear a one-time glitch. If the fault returns, it is reporting a real problem, usually a sensor, element, or relay, and repeated resets will not fix it. Note the display and book a diagnosis.
Where Do I Find My Dacor Model Number?
The rating plate is usually on the oven door frame, the side of the drawer, or behind a cooktop control. The model number lets a technician match any code to the correct control generation.

Related Reading

Dacor Oven Troubleshooting

Heat and ignition problems.

Dacor Maintenance Guide

Prevent the common faults.

Dacor Repair

Models and problems we service.

Book a Repair in the Loveland Area

Detailed model and symptom intake, genuine OEM parts, and written warranty terms across Loveland and the Colorado high country.

Appliance Symptom Notes for Loveland

For homes across Loveland, Berthoud, Johnstown, Erie, an error code or controls not working as expected can have several causes. A model-specific diagnosis is the safest way to choose the next repair step. ZIP codes commonly served include 80537, 80513, 80534, 80516, 80517, 80620.

Call TodayRequest Service